Brother QL 570 - P-Touch B/W Direct Thermal Printer Manual de instalación y funcionamiento - Página 37

Navegue en línea o descargue pdf Manual de instalación y funcionamiento para Etiquetadora Brother QL 570 - P-Touch B/W Direct Thermal Printer. Brother QL 570 - P-Touch B/W Direct Thermal Printer 43 páginas. Professional label printer
También para Brother QL 570 - P-Touch B/W Direct Thermal Printer: Folleto (4 páginas), Manual del usuario (36 páginas), Manual del usuario (26 páginas), Manual del usuario (40 páginas), Manual de instalación y funcionamiento (45 páginas), Manual del usuario (2 páginas), Manual de instalación del software (15 páginas)

Remove the backing paper

cleaning sheet into the printing unit until it reaches the area shown

by an arrow in the diagram below.

•

Insert the sheet without removing the

•

Check that the printing surface of cleaning sheet is facing upwards.

Close the DK Roll compartment cover and press the ON/OFF

button ( ) to turn the Brother QL-570/580N on.

Press the Feed button for more

than one second.

The roller spins by 10 cm.

The adhesive face of the cleaning sheet

removes the stain or

dust on the roller.

•

If you do not press the Feed button for

more than one second, the roller spins

only 8mm.

•

Dispose of the cleaning sheet after

use.

Label outlet maintenance

If a label causes the machine to jam

due to glue attached to the label outlet,

remove the power cord and clean the

label outlet with a cloth dipped into

ethanol or isopropyl alcohol.

and feed the edge

part of sheet.

Feed button

Label outlet

of the

STEP