Brother QL 570 - P-Touch B/W Direct Thermal Printer Setup & Operation Manual - Page 37

Browse online or download pdf Setup & Operation Manual for Label Maker Brother QL 570 - P-Touch B/W Direct Thermal Printer. Brother QL 570 - P-Touch B/W Direct Thermal Printer 43 pages. Professional label printer
Also for Brother QL 570 - P-Touch B/W Direct Thermal Printer: Brochure (4 pages), User Manual (36 pages), User Manual (26 pages), User Manual (40 pages), Setup & Operation Manual (45 pages), User Manual (2 pages), Software Installation Manual (15 pages)

Print Page
Brother QL 570 - P-Touch B/W Direct Thermal Printer Setup & Operation Manual
4
Remove the backing paper
cleaning sheet into the printing unit until it reaches the area shown
by an arrow in the diagram below.
•
Insert the sheet without removing the
•
Check that the printing surface of cleaning sheet is facing upwards.
5
Close the DK Roll compartment cover and press the ON/OFF
button ( ) to turn the Brother QL-570/580N on.
6
Press the Feed button for more
than one second.
The roller spins by 10 cm.
The adhesive face of the cleaning sheet
removes the stain or
dust on the roller.
•
If you do not press the Feed button for
more than one second, the roller spins
only 8mm.
•
Dispose of the cleaning sheet after
use.
Label outlet maintenance
If a label causes the machine to jam
due to glue attached to the label outlet,
remove the power cord and clean the
label outlet with a cloth dipped into
ethanol or isopropyl alcohol.
and feed the edge
part of sheet.
Feed button
Label outlet
of the
STEP
STEP
STEP
STEP
35
1
2
3
4