Brother QL-1050 Manual del usuario - Página 16

Navegue en línea o descargue pdf Manual del usuario para Etiquetadora Brother QL-1050. Brother QL-1050 48 páginas. Label printer
También para Brother QL-1050: Manual del conductor (27 páginas), Manual de inicio rápido (2 páginas), Manual del usuario del software (40 páginas), Manual del usuario del software (48 páginas), Hoja de especificaciones (2 páginas), Guía Rápida (2 páginas), Manual del usuario (40 páginas), Manual de inicio rápido (2 páginas), Manual de instalación del software (15 páginas)

Imprimir página
Brother QL-1050 Manual del usuario
10
Getting started

5 Attaching the Label Tray

The machine contains a label tray
which can hold up to 10 individual
label sheets.
As shown in the right hand
illustration, attach the label tray to
the front face of the machine.
When printing more than 10 labels
•
continuously using the auto cut
function, remove the paper guide to
prevent a paper jam.

6 Using the Interface Cable

Serial (RS-232C) cables and Network (Ethernet) cables are not standard
accessories.
Use the appropriate cable for your type of interface.
•
USB Interface Cable
Use the enclosed interface cable.
•
RS-232C (Serial) Cable (Windows
The pin assignments for the serial cables (RS-232C cables) which can be used with this
machine are shown in the table below. You can purchase the cables at an electronics
store. Do not use an interface cable that is longer than 6 feet (2.0 meters).
Brother QL label printer
(D-sub female, lock screw #4-40 inch screw)
Signal
Name
Number
DCD
RXD
TXD
DTR
GND
DSR
RTS
CTS
RI
The RS-232C serial connector part of this equipment is not Limited Power Source.
Pin
1
2
3
4
5
6
7
8
9
®
only)
Pin Assignments
PC
(D-Sub9P female)
Pin
Signal
Number
Name
1
DCD
2
RXD
3
TXD
4
DTR
5
GND
6
DSR
7
RTS
8
CTS
9
RI