Brother QL-1050 Panduan Pengguna - Halaman 16

Jelajahi secara online atau unduh pdf Panduan Pengguna untuk Pembuat label Brother QL-1050. Brother QL-1050 48 halaman. Label printer
Juga untuk Brother QL-1050: Panduan Pengemudi (27 halaman), Panduan Memulai Cepat (2 halaman), Panduan Pengguna Perangkat Lunak (40 halaman), Panduan Pengguna Perangkat Lunak (48 halaman), Lembar Spesifikasi (2 halaman), Panduan Cepat (2 halaman), Panduan Pengguna (40 halaman), Panduan Memulai Cepat (2 halaman), Panduan Instalasi Perangkat Lunak (15 halaman)

Halaman Cetak
Brother QL-1050 Panduan Pengguna
10
Getting started

5 Attaching the Label Tray

The machine contains a label tray
which can hold up to 10 individual
label sheets.
As shown in the right hand
illustration, attach the label tray to
the front face of the machine.
When printing more than 10 labels
•
continuously using the auto cut
function, remove the paper guide to
prevent a paper jam.

6 Using the Interface Cable

Serial (RS-232C) cables and Network (Ethernet) cables are not standard
accessories.
Use the appropriate cable for your type of interface.
•
USB Interface Cable
Use the enclosed interface cable.
•
RS-232C (Serial) Cable (Windows
The pin assignments for the serial cables (RS-232C cables) which can be used with this
machine are shown in the table below. You can purchase the cables at an electronics
store. Do not use an interface cable that is longer than 6 feet (2.0 meters).
Brother QL label printer
(D-sub female, lock screw #4-40 inch screw)
Signal
Name
Number
DCD
RXD
TXD
DTR
GND
DSR
RTS
CTS
RI
The RS-232C serial connector part of this equipment is not Limited Power Source.
Pin
1
2
3
4
5
6
7
8
9
®
only)
Pin Assignments
PC
(D-Sub9P female)
Pin
Signal
Number
Name
1
DCD
2
RXD
3
TXD
4
DTR
5
GND
6
DSR
7
RTS
8
CTS
9
RI