Brother Stampcreator PRO SC2000USB Referencia rápida - Página 30
Navegue en línea o descargue pdf Referencia rápida para Etiquetadora Brother Stampcreator PRO SC2000USB. Brother Stampcreator PRO SC2000USB 36 páginas.
Imprimir página
Cleaning the draft sheet rollers
The draft sheet rollers should be cleaned after 50 draft sheets (1 pack) have been printed.
a Peel off the pre-cut section from the side of the cleaning sheet marked
SIDE A.
☞ Never reuse a cleaning sheet.
Do not use a cleaning sheet that has been folded or damaged or
has had any part of the paper other than the pre-cut section
removed.
b Load the cleaning sheet into the draft tray with side A facing up as
shown in the illustration.
c Insert the draft tray into the draft tray slot.
d Press the Mode button on the SC-2000USB until "CLEAN" appears on
the LCD display.
e Press the Set button to feed in the cleaning sheet, and then eject it from
the exit slot.
☞ Store unused cleaning sheets in their packages and do not expose
them to high temperatures, high humidity or direct sunlight.
Cleaning the ID label rollers
The ID label rollers should be cleaned if the ID labels often feed incorrectly.
a Peel off the pre-cut section from the side of the cleaning sheet marked
SIDE A.
☞ Never reuse a cleaning sheet.
Do not use a cleaning sheet that has been folded or damaged or
has had any part of the paper other than the pre-cut section
removed.
b Insert the cleaning sheet into the ID label slot with side A facing toward
the ink ribbon compartment.
c Press the Mode button on the SC-2000USB until "CLEAN" appears on
the LCD display.
d Press the Set button to feed in the cleaning sheet, and then eject it from
the exit slot.
Maintenance
Side A
Draft tray
ID label slot
Side A
27