Fujitsu Primergy RX100 S3 Manual del suplemento de servicio - Página 17
Navegue en línea o descargue pdf Manual del suplemento de servicio para Servidor Fujitsu Primergy RX100 S3. Fujitsu Primergy RX100 S3 45 páginas.
También para Fujitsu Primergy RX100 S3: Manual de inicio (9 páginas)
Imprimir página
4
Replacement routines
V
CAUTION!
Observe the safety instructions in the chapter "Safety notes" on page 11
et seqq. .
4.1
Preparation
4.1.1
Opening the server
Ê Terminate all applications and shut down the server correctly.
Ê If your operating system has not switched off the server, press the on/off
button.
Ê Pull all power connectors out of the power outlets.
Ê Disconnect all cables on the rear of the server.
Ê Loosen the two knurled screws and pull the server as far as possible out of
the rack.
Depending on how accessible the server is in the rack cabinet, it can make
sense to remove it from the cabinet. You will find a detailed description in the
Options Guide or the Operating Manual.
Ê Loosen the green knurled screw at the server's rear side.
Ê Push the top cover approxiate 2 cm in direction of the server's rear side.
Ê Remove the top cover.
RX100 S3
Service Supplement
17