Fujitsu Primergy RX100 S3 Manual del suplemento de servicio - Página 19
Navegue en línea o descargue pdf Manual del suplemento de servicio para Servidor Fujitsu Primergy RX100 S3. Fujitsu Primergy RX100 S3 45 páginas.
También para Fujitsu Primergy RX100 S3: Manual de inicio (9 páginas)
Imprimir página
Replacement routines
Ê Fasten the LED board with the two screws.
Ê Plug the cable.
Ê Close the server and connect all power plugs (for a detailed description see
the Options Guide).
V
CAUTION!
After installing the new LED board, it is necessary to program the
ChassisID prom with the help of the "ChassisIDProm Tool" to enable
ServerView and ServerStart to identify the system.
You will find the tool on the ServerSupport CD and/or it can be
downloaded from the Fujitsu Siemens Computers Service and
Support page (URL:
http://extranet.fujitsu-siemens.com/service/information/intelservers/tools).
4.3
Replacing the power supply unit
Ê Open the server as described in the section "Preparation" on page 17.
Figure 3: Loosening the screw
Ê Loosen the knurled screw at the rear side of the power supply unit (see
arrow).
Ê Disconnect all power supply cables from the system board and the drives
(see cabling in the appendix).
RX100 S3
Replacing the power supply unit
Service Supplement
19