Fujitsu PRIMERGY RX200 S6 Manual del suplemento de servicio - Página 29

Navegue en línea o descargue pdf Manual del suplemento de servicio para Servidor Fujitsu PRIMERGY RX200 S6. Fujitsu PRIMERGY RX200 S6 50 páginas.

Ê Push the metal frame holding the LED board approx. 2 cm toward the front

side.

Figure 8: Replacing the LED board

Ê Disconnect the front panel cable from the LED board (1).

Ê Unlock the LED board by pressing the locking tabs on both sides (2).

Ê Pull out the defective LED board (3).

The front VGA cable (see circle) is attached to the metal frame, not to the

LED board.

Installing the new LED board

Ê Position the new LED board on the metal frame.

Ê Press the LED board against the metal frame until the locking tabs on both

sides engage.

Ê Connect the front panel cable to the LED board.

Ê Push the metal frame holding the LED board in its bay.

Ê Fasten the metal frame with the screw (see

Ê Close the server and connect all power plugs (for a detailed description see

the Options Guide).

RX200 S6

Service Supplement

Replacement routines

figure

7).