Fujitsu PRIMERGY RX200 S6 서비스 보충 설명서 - 페이지 29

{카테고리_이름} Fujitsu PRIMERGY RX200 S6에 대한 서비스 보충 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Fujitsu PRIMERGY RX200 S6 50 페이지.

Ê Push the metal frame holding the LED board approx. 2 cm toward the front

side.

Figure 8: Replacing the LED board

Ê Disconnect the front panel cable from the LED board (1).

Ê Unlock the LED board by pressing the locking tabs on both sides (2).

Ê Pull out the defective LED board (3).

The front VGA cable (see circle) is attached to the metal frame, not to the

LED board.

Installing the new LED board

Ê Position the new LED board on the metal frame.

Ê Press the LED board against the metal frame until the locking tabs on both

sides engage.

Ê Connect the front panel cable to the LED board.

Ê Push the metal frame holding the LED board in its bay.

Ê Fasten the metal frame with the screw (see

Ê Close the server and connect all power plugs (for a detailed description see

the Options Guide).

RX200 S6

Service Supplement

Replacement routines

figure

7).