Fujitsu fi-4220C2 Primeros pasos - Página 28

Navegue en línea o descargue pdf Primeros pasos para Escáner Fujitsu fi-4220C2. Fujitsu fi-4220C2 30 páginas. Flatbed scanner
También para Fujitsu fi-4220C2: Manual de procedimientos de instalación (7 páginas), Manual de procedimientos de instalación (9 páginas), Folleto y especificaciones (2 páginas), Procedimientos de instalación (3 páginas), Instrucciones de limpieza (2 páginas)

Imprimir página
Fujitsu fi-4220C2 Primeros pasos
Appendix 3
The glass surface inside the
ARNI N G
ADF becomes hot during the
operation. Before replacing the
consumables, turn its power off
and unplug the AC adapter from
the outlet. Wait at least
15 minutes.
■ Consumables and Replacement
Cycles
Below are specifications of consumable items and
their recommended replacement cycles.
Parts
Description
Number
Pad ASSY
PA03289-
0111
Pick roller
PA03289-
0001
To purchase consumables, contact the store where you
purchased the scanner or an authorized FUJITSU scan-
ner service provider.
The replacement cycles above are rough guidelines
when using A4 or Letter woodfree or wood containing
paper 64 g/m2 (17 lb). This cycle varies according to the
type of paper and how frequently the scanner is used and
cleaned.
Use only the specified consumables.
ATTENTION
Do not use other consumables.
AP-5
REPLACING CONSUMABLES
Standard
Replacement
Cycle
After 50,000 scans
or one year
After 100,000
sheets or one year
The illustration below demonstrates the locations of the
replacement parts. Refer to "Chapter 4 Replacing Con-
sumables" fi-4220C2 Operator's Guide on the Setup
CD-ROM.
■ Replacing the Pad ASSY
■ Replacing the Pick Roller
Pick Roller
Pick Roller's Shaft