Fujitsu fi-4220C2 Başlarken - Sayfa 28

Tarayıcı Fujitsu fi-4220C2 için çevrimiçi göz atın veya pdf Başlarken indirin. Fujitsu fi-4220C2 30 sayfaları. Flatbed scanner
Ayrıca Fujitsu fi-4220C2 için: Kurulum Prosedürleri Kılavuzu (7 sayfalar), Kurulum Prosedürleri Kılavuzu (9 sayfalar), Broşür ve Teknik Özellikler (2 sayfalar), Kurulum Prosedürleri (3 sayfalar), Temizlik Talimatları (2 sayfalar)

Sayfayı Yazdır
Fujitsu fi-4220C2 Başlarken
Appendix 3
The glass surface inside the
ARNI N G
ADF becomes hot during the
operation. Before replacing the
consumables, turn its power off
and unplug the AC adapter from
the outlet. Wait at least
15 minutes.
■ Consumables and Replacement
Cycles
Below are specifications of consumable items and
their recommended replacement cycles.
Parts
Description
Number
Pad ASSY
PA03289-
0111
Pick roller
PA03289-
0001
To purchase consumables, contact the store where you
purchased the scanner or an authorized FUJITSU scan-
ner service provider.
The replacement cycles above are rough guidelines
when using A4 or Letter woodfree or wood containing
paper 64 g/m2 (17 lb). This cycle varies according to the
type of paper and how frequently the scanner is used and
cleaned.
Use only the specified consumables.
ATTENTION
Do not use other consumables.
AP-5
REPLACING CONSUMABLES
Standard
Replacement
Cycle
After 50,000 scans
or one year
After 100,000
sheets or one year
The illustration below demonstrates the locations of the
replacement parts. Refer to "Chapter 4 Replacing Con-
sumables" fi-4220C2 Operator's Guide on the Setup
CD-ROM.
■ Replacing the Pad ASSY
■ Replacing the Pick Roller
Pick Roller
Pick Roller's Shaft