Fujitsu FI-5530C2 Primeros pasos - Página 8

Navegue en línea o descargue pdf Primeros pasos para Escáner Fujitsu FI-5530C2. Fujitsu FI-5530C2 11 páginas. Image scanner
También para Fujitsu FI-5530C2: Primeros pasos (28 páginas), Manual de procedimientos de instalación (6 páginas), Especificaciones (2 páginas), Manual de introducción (27 páginas), Manual de introducción (11 páginas), Instrucciones de limpieza (2 páginas), Instrucciones de limpieza (2 páginas)

Installation (Custom)

1. Perform steps 1. to 3. in

mended)" (page.

2. Click the [Installation (Custom)] button.

3. Select the check box for the software to install

and click the [Next] button.

4. Follow the instructions on the screen to pro-

ceed with the installation.

"Installation (Recom-

7).

2.4 Checking Scanner Driver

Operation

This section explains how to check the operation of the

installed scanner driver by using PaperStream Capture.

Make sure that the scanner driver is installed properly,

following the procedure below.

■ Checking the Operation of the

Scanner Driver

1. Load the document on the scanner.

For information about how to load the document,

refer to section 1.2 in fi-5530C2 Operator's

Guide.

2. Start up PaperStream Capture.

• Windows XP/Windows Vista/Windows

Server 2008/Windows 7

Select the [Start] menu  [All Programs] 

[PaperStream Capture]  [PaperStream

Capture].

• Windows Server 2012/Windows 8

Right-click the Start screen, select [All apps]

on the app bar, and then select [PaperStream

Capture] under [PaperStream Capture].

• Windows Server 2012 R2/Windows 8.1

Click [] on the lower left side of the Start

screen, and then select [PaperStream Capture]

under [PaperStream Capture].

To display [], move the mouse cursor.

3. Click the [Scan] button in the Menu Area.

4. Click one of the three types of document

profiles that are prepared beforehand.

Below is an example of when the document

profile [Black and White] is clicked.

⇒

The document is scanned, and the scanned

image is displayed.