Fujitsu fi-5650C Limpieza y mantenimiento - Página 16

Navegue en línea o descargue pdf Limpieza y mantenimiento para Escáner Fujitsu fi-5650C. Fujitsu fi-5650C 39 páginas. Image scanner
También para Fujitsu fi-5650C: Manual de procedimientos de instalación (7 páginas), Manual de procedimientos de instalación (9 páginas), Procedimientos de instalación (3 páginas), Especificaciones (2 páginas), Folleto y especificaciones (2 páginas), Manual de introducción (40 páginas), Manual de instrucciones (11 páginas), Instrucciones de limpieza y sustitución de consumibles (19 páginas), Instrucciones de limpieza (2 páginas)

CONTENTS

Introduction

1 NAMES AND FUNCTIONS OF PARTS

2 BASIC SCANNER OPERATION

3 SCANNING VARIOUS TYPES OF DOCUMENTS

4 DAILY CARE

5 REPLACING CONSUMABLES

5.1 Consumable and replacement cycle

5.2 Replacing the brake roller

5.3 Replacing the pick roller set

6 TROUBLESHOOTING

7 ONLINE SETUP

8 DOCUMENT SPECIFICATION OF ADF

9 OPTIONS

10 SCANNER SPECIFICATIONS

Appendix

5.3 Replacing the pick roller set

1. Open the ADF while pushing the ADF button.

2. Remove the ADF paper chute from the scanner.

3. Open the pick roller cover. Remove the rollers from the shafts.

4. Install the new pick rollers aligning their grooves to the shafts.

5. Close the pick roller cover.

6. Attach the ADF paper chute.

7. Push in the center of the ADF to close it until the ADF button is locked.

8. Reset the Pick Roller counter. For details on resetting, refer to

CAUTION

Be careful not to pinch your fingers with the ADF cover. -Do not close the ADF cover when the pick roller cover is opened.

ATTENTION

Confirm that rollers of the pick roller set are firmly installed. If not, they may cause feeding errors such as document jams.

"7.6 Resetting the consumable

counters".