Fujitsu fi-5650C Cleaning And Maintenance - Page 16

Browse online or download pdf Cleaning And Maintenance for Scanner Fujitsu fi-5650C. Fujitsu fi-5650C 39 pages. Image scanner
Also for Fujitsu fi-5650C: Installation Procedures Manual (7 pages), Installation Procedures Manual (9 pages), Installation Procedures (3 pages), Specifications (2 pages), Brochure & Specs (2 pages), Getting Started Manual (40 pages), Instruction Manual (11 pages), Consumable Replacement And Cleaning Instructions (19 pages), Cleaning Instructions (2 pages)

Print Page

CONTENTS

Introduction

1 NAMES AND FUNCTIONS OF PARTS

2 BASIC SCANNER OPERATION

3 SCANNING VARIOUS TYPES OF DOCUMENTS

4 DAILY CARE

5 REPLACING CONSUMABLES

5.1 Consumable and replacement cycle

5.2 Replacing the brake roller

5.3 Replacing the pick roller set

6 TROUBLESHOOTING

7 ONLINE SETUP

8 DOCUMENT SPECIFICATION OF ADF

9 OPTIONS

10 SCANNER SPECIFICATIONS

Appendix

5.3 Replacing the pick roller set

1. Open the ADF while pushing the ADF button.

2. Remove the ADF paper chute from the scanner.

3. Open the pick roller cover. Remove the rollers from the shafts.

4. Install the new pick rollers aligning their grooves to the shafts.

5. Close the pick roller cover.

6. Attach the ADF paper chute.

7. Push in the center of the ADF to close it until the ADF button is locked.

8. Reset the Pick Roller counter. For details on resetting, refer to

CAUTION

Be careful not to pinch your fingers with the ADF cover. -Do not close the ADF cover when the pick roller cover is opened.

ATTENTION

Confirm that rollers of the pick roller set are firmly installed. If not, they may cause feeding errors such as document jams.

"7.6 Resetting the consumable

counters".