Fujitsu FI-6000NS Manual de introducción - Página 29

Navegue en línea o descargue pdf Manual de introducción para Escáner Fujitsu FI-6000NS. Fujitsu FI-6000NS 35 páginas. Fujitsu fi-6000ns: user guide
También para Fujitsu FI-6000NS: Especificaciones (2 páginas)

Fujitsu FI-6000NS Manual de introducción
Appendix C
The glass scanner windows
ARNI N G
inside the ADF can become hot
when the scanner is used.
Before cleaning inside the
scanner or replacing any parts,
turn off the power, unplug the AC
adapter from the outlet, and wait
for at least 15 minutes.
■ Replacement Part No. and
Standard Replacement Cycles
The usage count of consumable parts can be checked in
administrator mode on the "Usage Status" screen.
When parts need to be replaced soon, the "Status"
information field becomes orange. When parts need to
be replaced immediately, the "Status" information field
becomes red.
The following table specifies the replacement part
numbers and the standard replacement cycles.
Part name
Pad Assembly
After every 50,000 sheets scanned or
(PA03289-0111)
once a year

Pick Roller

After every 100,000 sheets scanned
(PA03289-0001)
or once a year
To obtain these parts, contact your FUJITSU dealer or
an authorized FUJITSU scanner service provider.
These replacement cycles are rough guidelines when
2
using 64 g/m
(17 lb) A4/Letter woodfree or wood
containing paper. They may vary according to the type
of documents scanned, scanner usage, and cleaning
frequency.
Replacing Consumable Parts
Replacement cycle
Use only the PFU LIMITED parts
ATTENTION
specified. Do not use consumable parts
made by other manufacturers.
The following diagram shows the locations of the
consumable parts in the scanner. For more details, refer
to "5.5 Replacing Parts" in the "Network Scanner
fi-6000NS Operator's Guide".
■ Pad Assembly (PAD ASSY)
■ Pick Roller
Pick Roller
Network Scanner fi-6000NS Getting Started
Pick Roller's Shaft
15