- ページ 29

スキャナー Fujitsu FI-6000NSのPDF スタートマニュアルをオンラインで閲覧またはダウンロードできます。Fujitsu FI-6000NS 35 ページ。 Fujitsu fi-6000ns: user guide
Fujitsu FI-6000NS にも：仕様 (2 ページ)

ページを印刷する

Appendix C

The glass scanner windows

ARNI N G

inside the ADF can become hot

when the scanner is used.

Before cleaning inside the

scanner or replacing any parts,

turn off the power, unplug the AC

adapter from the outlet, and wait

for at least 15 minutes.

■ Replacement Part No. and

Standard Replacement Cycles

The usage count of consumable parts can be checked in

administrator mode on the "Usage Status" screen.

When parts need to be replaced soon, the "Status"

information field becomes orange. When parts need to

be replaced immediately, the "Status" information field

becomes red.

The following table specifies the replacement part

numbers and the standard replacement cycles.

Part name

Pad Assembly

After every 50,000 sheets scanned or

(PA03289-0111)

once a year

Pick Roller

After every 100,000 sheets scanned

(PA03289-0001)

or once a year

To obtain these parts, contact your FUJITSU dealer or

an authorized FUJITSU scanner service provider.

These replacement cycles are rough guidelines when

using 64 g/m

(17 lb) A4/Letter woodfree or wood

containing paper. They may vary according to the type

of documents scanned, scanner usage, and cleaning

frequency.

Replacing Consumable Parts

Replacement cycle

Use only the PFU LIMITED parts

ATTENTION

specified. Do not use consumable parts

made by other manufacturers.

The following diagram shows the locations of the

consumable parts in the scanner. For more details, refer

to "5.5 Replacing Parts" in the "Network Scanner

fi-6000NS Operator's Guide".

■ Pad Assembly (PAD ASSY)

■ Pick Roller

Pick Roller

Network Scanner fi-6000NS Getting Started

Pick Roller's Shaft