Fujitsu FI-6230 Limpieza y mantenimiento - Página 21

Navegue en línea o descargue pdf Limpieza y mantenimiento para Escáner Fujitsu FI-6230. Fujitsu FI-6230 47 páginas. Color duplex workgroup scanners
También para Fujitsu FI-6230: Manual de introducción (20 páginas), Folleto y especificaciones (2 páginas), Manual de instrucciones (10 páginas), Primeros pasos (23 páginas)

6. Attach a new Pick roller.

Insert the new Pick roller aligning the screw on the shaft with the slot in the Pick roller.

7. Attach the Pick roller shaft to the scanner.

Attach the Pick roller shaft to the scanner in reverse order of removing.

1) Set the right side of the Pick roller into place first, then fix the left side of the roller.

CAUTION

If you lift the pick roller tab with your fingernail, it may hurt your fingernail. Use a

paper clip to lift the pick roller tab if you cannot do it with your finger.

Pick roller shaft

Screw

Slot

Pick roller

ATTENTION

Make sure that the Pick roller is correctly attached. The incompletely-attached Pick roller

might cause document jams or other feed errors.

When attaching the Pick roller to the shaft, make sure that the roller's tab clicks into place.

Tab

Pick roller

Shaft