Fujitsu FI-6230 Pembersihan dan Pemeliharaan - Halaman 21
Jelajahi secara online atau unduh pdf Pembersihan dan Pemeliharaan untuk Pemindai Fujitsu FI-6230. Fujitsu FI-6230 47 halaman. Color duplex workgroup scanners
Juga untuk Fujitsu FI-6230: Panduan Memulai (20 halaman), Brosur & Spesifikasi (2 halaman), Buku Petunjuk (10 halaman), Memulai (23 halaman)
Halaman Cetak
6. Attach a new Pick roller.
Insert the new Pick roller aligning the screw on the shaft with the slot in the Pick roller.
7. Attach the Pick roller shaft to the scanner.
Attach the Pick roller shaft to the scanner in reverse order of removing.
1) Set the right side of the Pick roller into place first, then fix the left side of the roller.
CAUTION
If you lift the pick roller tab with your fingernail, it may hurt your fingernail. Use a
paper clip to lift the pick roller tab if you cannot do it with your finger.
Pick roller shaft
Screw
Slot
Pick roller
ATTENTION
Make sure that the Pick roller is correctly attached. The incompletely-attached Pick roller
might cause document jams or other feed errors.
When attaching the Pick roller to the shaft, make sure that the roller's tab clicks into place.
Tab
Pick roller
Shaft