Fujitsu fi-6800 Instrucciones de limpieza y sustitución de consumibles - Página 3

Navegue en línea o descargue pdf Instrucciones de limpieza y sustitución de consumibles para Escáner Fujitsu fi-6800. Fujitsu fi-6800 26 páginas. Image scanner
También para Fujitsu fi-6800: Especificaciones (2 páginas), Manual de introducción (8 páginas), Manual de introducción (8 páginas), Manual de introducción (9 páginas), Especificaciones (4 páginas), Funcionamiento cómodo (24 páginas), Primeros pasos (6 páginas)

EPLACING THE

ICK

Worn, defective, or improperly installed Pick Rollers will cause misfeeds

and paper jams. The Pick Rollers have an approximate life of 600,000

pages. If NCR or carbonless paper is used the life span of the Pick

Rollers may be decreased by half.

•

Make sure there is no paper

in the stacker.

•

Grab the ADF Release Tab

and lift it up to open the ADF.

Note:

When you stop pushing up on the ADF it stays at that location.

•

Open the Roller Cover by

grabbing the tabs on the left

and right sides with your

fingers and pull down.

•

Pull out on the tab that locks

the Pick Roller in place in

the direction of the arrow and

slide the Pick Roller off the

shaft.

•

Repeat the procedure above

to remove the second Pick

Roller.

Note:

The roller shaft and the hole in the Pick Rollers are keyed and will only

slide on in one orientation.

•

Install the new Pick Rollers

by aligning the hole in the

rollers with the roller shaft.

OLLERS

fi-6800 C

ONSUMABLE

EPLACEMENT AND

Roller Cover

Tab

Pick Roller

LEANING

NSTRUCTIONS