Fujitsu fi-6800 Инструкции по замене и очистке расходных материалов - Страница 3

Просмотреть онлайн или скачать pdf Инструкции по замене и очистке расходных материалов для Сканер Fujitsu fi-6800. Fujitsu fi-6800 26 страниц. Image scanner
Также для Fujitsu fi-6800: Технические характеристики (2 страниц), Руководство по началу работы (8 страниц), Руководство по началу работы (8 страниц), Руководство по началу работы (9 страниц), Технические характеристики (4 страниц), Удобное управление (24 страниц), Начало работы (6 страниц)

Fujitsu fi-6800 Инструкции по замене и очистке расходных материалов
R
P
R
EPLACING THE
ICK
Worn, defective, or improperly installed Pick Rollers will cause misfeeds
and paper jams. The Pick Rollers have an approximate life of 600,000
pages. If NCR or carbonless paper is used the life span of the Pick
Rollers may be decreased by half.
Make sure there is no paper
in the stacker.
Grab the ADF Release Tab
and lift it up to open the ADF.
Note:
When you stop pushing up on the ADF it stays at that location.
Open the Roller Cover by
grabbing the tabs on the left
and right sides with your
fingers and pull down.
Pull out on the tab that locks
the Pick Roller in place in
the direction of the arrow and
slide the Pick Roller off the
shaft.
Repeat the procedure above
to remove the second Pick
Roller.
Note:
The roller shaft and the hole in the Pick Rollers are keyed and will only
slide on in one orientation.
Install the new Pick Rollers
by aligning the hole in the
rollers with the roller shaft.
OLLERS
fi-6800 C
R
ONSUMABLE
EPLACEMENT AND
Roller Cover
Tab
Pick Roller
C
I
LEANING
NSTRUCTIONS
3