Fujitsu ETERNUS DX Disk Manual de configuración - Página 30

Navegue en línea o descargue pdf Manual de configuración para Almacenamiento Fujitsu ETERNUS DX Disk. Fujitsu ETERNUS DX Disk 35 páginas. Server connection, fcoe for linux driver settings for converged network adapter cards
También para Fujitsu ETERNUS DX Disk: Manual del usuario (35 páginas), Manual del usuario (42 páginas), Manual de configuración (28 páginas), Manual de configuración (44 páginas), Manual de configuración (28 páginas), Manual de configuración (29 páginas), Manual de configuración (25 páginas), Manual de configuración (32 páginas), Manual de configuración (31 páginas), Manual de configuración (43 páginas), Manual de configuración (21 páginas), Manual de configuración (24 páginas)

Chapter 2

Setup Procedure for QLogic Converged Network Adapter Cards

2.2

Setting Up the Converged Network Adapter Cards

This option cannot be individually applied to each port on the Converged Network Adapter card.

All ports on the target Converged Network Adapter card are configured with the same settings.

Reboot VMware ESXi.

# reboot

After rebooting VMware ESXi, check the setting values.

# esxcli system module parameters list -m qlnativefc | grep ql2xmaxqdepth

ql2xmaxqdepth

2.2.5.2

For VMware vSphere 5

Record the module name for the Converged Network Adapter card that is loaded into VMware ESXi.

The underlined portion indicates the loaded module name. In the following example, "qla2xxx" is the

module name.

# esxcli system module list | grep qla

qla2xxx

Module names may vary depending on the Converged Network Adapter card that is used.

Check the default value for the Converged Network Adapter card.

Specify the module name for the Converged Network Adapter card that you recorded in

check the default value.

# esxcli system module parameters list -m qla2xxx | grep ql2xmaxq

ql2xmaxqdepth

Change the setting values of the parameter for the Converged Network Adapter card driver.

Driver parameter

ql2xmaxqdepth

*1: Recommended value = 512 ¸ (number of FCoE ports that are connected to a single CA port) ¸

number of LUNs

(Round the result down)

Use the value of "8" if the actual result is lower.

FUJITSU Storage ETERNUS DX Configuration Guide -Server Connection- (FCoE) for VMware

int

Maximum queue depth to report for target devices.

true

int

Maximum queue depth to report for target devices.

Setting value

Arbitrary (*1)

(Up to 512 for each FCoE port of the ETERNUS DX)

Step 1

and

ESX

P3AM-4772-11ENZ0