Fujitsu ETERNUS DX Disk Configuration Manual - Page 30

Browse online or download pdf Configuration Manual for Storage Fujitsu ETERNUS DX Disk. Fujitsu ETERNUS DX Disk 35 pages. Server connection, fcoe for linux driver settings for converged network adapter cards
Also for Fujitsu ETERNUS DX Disk: User Manual (35 pages), User Manual (42 pages), Configuration Manual (28 pages), Configuration Manual (44 pages), Configuration Manual (28 pages), Configuration Manual (29 pages), Configuration Manual (25 pages), Configuration Manual (32 pages), Configuration Manual (31 pages), Configuration Manual (43 pages), Configuration Manual (21 pages), Configuration Manual (24 pages)

Fujitsu ETERNUS DX Disk Configuration Manual
Chapter 2
Setup Procedure for QLogic Converged Network Adapter Cards
2.2
Setting Up the Converged Network Adapter Cards
This option cannot be individually applied to each port on the Converged Network Adapter card.
All ports on the target Converged Network Adapter card are configured with the same settings.
4
Reboot VMware ESXi.
# reboot
5
After rebooting VMware ESXi, check the setting values.
# esxcli system module parameters list -m qlnativefc | grep ql2xmaxqdepth
ql2xmaxqdepth
2.2.5.2
For VMware vSphere 5
1
Record the module name for the Converged Network Adapter card that is loaded into VMware ESXi.
The underlined portion indicates the loaded module name. In the following example, "qla2xxx" is the
module name.
# esxcli system module list | grep qla
qla2xxx
Module names may vary depending on the Converged Network Adapter card that is used.
2
Check the default value for the Converged Network Adapter card.
Specify the module name for the Converged Network Adapter card that you recorded in
check the default value.
# esxcli system module parameters list -m qla2xxx | grep ql2xmaxq
ql2xmaxqdepth
3
Change the setting values of the parameter for the Converged Network Adapter card driver.
Driver parameter
ql2xmaxqdepth
*1: Recommended value = 512 ¸ (number of FCoE ports that are connected to a single CA port) ¸
number of LUNs
(Round the result down)
Use the value of "8" if the actual result is lower.
FUJITSU Storage ETERNUS DX Configuration Guide -Server Connection- (FCoE) for VMware
int
8
Maximum queue depth to report for target devices.
true
true
int
Maximum queue depth to report for target devices.
Setting value
Arbitrary (*1)
(Up to 512 for each FCoE port of the ETERNUS DX)
30
Copyright 2015 FUJITSU LIMITED
Step 1
and
®
ESX
P3AM-4772-11ENZ0