Fujitsu Eternus DX200F Manual de instalación - Página 2

Navegue en línea o descargue pdf Manual de instalación para Almacenamiento Fujitsu Eternus DX200F. Fujitsu Eternus DX200F 10 páginas. Hybrid storage systems, all-flash arrays, power synchronized unit
También para Fujitsu Eternus DX200F: Manual de instrucciones (48 páginas), Manual de configuración (28 páginas), Manual de configuración (13 páginas), Manual de configuración (16 páginas), Manual de configuración (38 páginas), Precauciones de seguridad (12 páginas)

Installation in a Rack

STEP

The rack rail needs to be attached to the rack and the ETERNUS DX (controller enclosure) needs to be installed.

Configuration Guide (Basic)

The center of gravity must be taken into consideration to prevent a rack from toppling over. The controller

IMPORTANT

enclosure should generally be installed from bottom to top to lower the center of gravity and to ensure the safe

use of racks.

Attach the rack rails to the rack.

The size of the controller enclosure is 2U.

Plate

M5 screws

(Front rack pillars)

Install and fasten the controller enclosure in the rack.

M5 screws

Flange cover

IMPORTANT

Rack rail (for left side)

Washers

Plate

M5 screws

Rack rail (for right side)

M5 screws

Flange cover

Make sure to install or remove the controller enclosure to or from a rack with two or more people.

FUJITSU Storage ETERNUS DX200F All Flash Array Setup Guide

(Rear rack pillars)

M5 screws

Washers

P3AM-8482-01ENZ0