Fujitsu Eternus DX90 S2 Manual - Página 14

Navegue en línea o descargue pdf Manual para Almacenamiento Fujitsu Eternus DX90 S2. Fujitsu Eternus DX90 S2 18 páginas. Server connection. (fibre channel) for aix
También para Fujitsu Eternus DX90 S2: Manual del usuario (35 páginas), Manual del usuario (42 páginas), Instalación (20 páginas), Manual de configuración Conexión al servidor (13 páginas), Instalación del hardware (23 páginas), Manual de configuración (28 páginas), Manual de configuración (15 páginas), Manual de configuración (38 páginas)

Imprimir página
Fujitsu Eternus DX90 S2 Manual
RAID Configuration Settings
Use ETERNUS Web GUI to set RAID configurations in the ETERNUS DX Disk storage system.
Perform the following settings:
RAID group creation
●
Volume creation
●
Hot spare registration
●
Default RAID groups, volumes and LUN mappings are preset in the factory. Refer to "ETERNUS Web GUI User's
Point
Guide" if the preset values are to be changed.
□ RAID group creation
Create RAID groups to create volumes.
To display the screen to create RAID groups:
Click [Create] in [Action] on the [RAID Group] tab.
□ Volume creation
Create volumes in the RAID group.
To display the screen to create volumes.
Click [Create] in [Action] on the [Volume] tab.
□ Hot spare registration
Register the hot spare for the failure of a drive.
To display the screen to register the hot spare:
Click [Disks] in [Category] on the [Component] tab.
ƪ
Global Hot Spare registration
Select the drive that is to be registered as the
Global Hot Spare and click [Assign Global HS] in
[Action].
ƪ
Dedicated Hot Spare registration
Select the drive that is to be registered as the
Dedicated Hot Spare and click [Assign Dedicated
HS] in [Action].
-Installation- "5.1.5 RAID Configuration Settings"
ETERNUS DX80 S2/DX90 S2 Disk storage system Read Me First
14
Copyright 2013 FUJITSU LIMITED
P3AM-4872-11EN