Fujitsu Eternus DX90 S2 Handmatig - Pagina 14

Blader online of download pdf Handmatig voor {categorie_naam} Fujitsu Eternus DX90 S2. Fujitsu Eternus DX90 S2 18 pagina's. Server connection. (fibre channel) for aix
Ook voor Fujitsu Eternus DX90 S2: Gebruikershandleiding (35 pagina's), Gebruikershandleiding (42 pagina's), Installeer setup (20 pagina's), Configuratiehandleiding Serververbinding (13 pagina's), Hardware-installatie (23 pagina's), Configuratiehandleiding (28 pagina's), Configuratiehandleiding (15 pagina's), Configuratiehandleiding (38 pagina's)

RAID Configuration Settings

Use ETERNUS Web GUI to set RAID configurations in the ETERNUS DX Disk storage system.

Perform the following settings:

RAID group creation

●

Volume creation

●

Hot spare registration

●

Default RAID groups, volumes and LUN mappings are preset in the factory. Refer to "ETERNUS Web GUI User's

Point

Guide" if the preset values are to be changed.

□ RAID group creation

Create RAID groups to create volumes.

To display the screen to create RAID groups:

Click [Create] in [Action] on the [RAID Group] tab.

□ Volume creation

Create volumes in the RAID group.

To display the screen to create volumes.

Click [Create] in [Action] on the [Volume] tab.

□ Hot spare registration

To display the screen to register the hot spare:

Click [Disks] in [Category] on the [Component] tab.

Global Hot Spare registration

Select the drive that is to be registered as the

Global Hot Spare and click [Assign Global HS] in

[Action].

Dedicated Hot Spare registration

Select the drive that is to be registered as the

Dedicated Hot Spare and click [Assign Dedicated

HS] in [Action].

-Installation- "5.1.5 RAID Configuration Settings"

ETERNUS DX80 S2/DX90 S2 Disk storage system Read Me First

P3AM-4872-11EN