Fujitsu PRIMERGY SX910 S1 Manual de instrucciones - Página 26

Navegue en línea o descargue pdf Manual de instrucciones para Almacenamiento Fujitsu PRIMERGY SX910 S1. Fujitsu PRIMERGY SX910 S1 46 páginas. Storage blade

Imprimir página

Installing/removing a Storage Blade

Removing the dummy module

Any unused slots on the front of the system unit are fitted with appropriate

dummy modules to comply with electromagnetic compatibility (EMC)

regulations and to ensure sufficient cooling of the system components. The

power supply unit slots on the back do not necessarily have to be populated.

To add a storage blade, you must first remove a dummy module from the

relevant slot.

Figure 4: Remove the dummy module

Ê Push up the release lever (1) and pull the dummy module out of the slot by

its handles.

CAUTION!

Keep the dummy module for future use. If you remove a storage blade or

a server blade and do not replace it with a new one, you must reinstall

the dummy module due to cooling, to comply with EMC regulations, and

to protect against fire.

Operating Manual

SX910 S1