AEG OKO-SANTO 2972-6 i Instrucciones de uso e instalación - Página 14
Navegue en línea o descargue pdf Instrucciones de uso e instalación para Frigorífico AEG OKO-SANTO 2972-6 i. AEG OKO-SANTO 2972-6 i 28 páginas. Integrating fridge freezer
Imprimir página
Energy Saving Tips
¥ Do not install the appliance near radiators or other sources of conti-
nuous warmth. High ambient temperatures cause longer, more fre-
quent operation of the compressor.
¥ Ensure sufficient air circulation at the appliance base and at the back
wall of the appliance. Never cover air vent openings.
¥ Do not place warm foods into the appliance. Allow warm foods to
cool first.
¥ Do not leave the door open any longer than necessary.
¥ Do not set temperature any colder than necessary.
¥ Put frozen food in the fridge to defrost. The cold in the frozen food
will then be used to cool the fridge.
Something Not Working
If the appliance is not functioning correctly, please carry out the fol-
lowing checks before contacting your local AEG Service Force Cen-
tre.
Warning!
Repairs should only be carried out by qualified service engineers.
Repairs carried out by inexperienced persons may cause injury or
serious malfunctioning.
Symptom
Appliance does not work.
Appliance cools too much.
14
Possible Cause
Appliance is not switched on Switch on the appliance.
Mains plug is not plugged in
or is loose.
Fuse has blown or is defec-
tive.
Socket is defective.
Temperature is set too cold. Turn the temperature control
Remedy
Insert mains plug.
Check fuse, replace if
necessary.
Mains malfunctions are to be
corrected by an electrician.
knob to a warmer setting.