Fujitsu D2779 Manual técnico - Página 20

Navegue en línea o descargue pdf Manual técnico para Placa base Fujitsu D2779. Fujitsu D2779 32 páginas. System board d2779 for primergy tx100 s2

Main memory

3.2

Main memory

The system board supports up to 16 GB of main memory. 4 slots (2 memory

banks with 2 slots each) are provided for the main memory. Every slot can be

fitted with DDR3 UDIMMs with ECC with 1 GB, 2 GB or 4 GB.

The system board supports x72 ECC DDR3 UDIMMs with 1 Gbit and 2 Gbit.

RDIMMS are not supported.

ECC with memory scrubbing is supported. There is no support for non-ECC-

DIMMs.

Installing and removing memory boards and DIMMs is described in the

Options Guide.

The system board has four slots for memory modules. For dual-channel

operation the memory modules must be equipped in pairs and color coded,

starting from the bottom to the top.

Black slots: DIMM 1A (1) and DIMM 1B (2)

Blue slots: DIMM 2A (3) and DIMM 2B (4)

Figure 2: DIMM slot assignment

– Each memory bank is equipped with two memory modules with the same

capacity.

– The module capacity between pairs can differ: pair 1A/1B can be populated

with two 1 GB modules and pair 2A/2B with two 2 GB modules.

Technical Manual

Features

D2779 (TX100 S2)