Fujitsu D2779 Manual técnico - Página 20

Procurar online ou descarregar pdf Manual técnico para Placa-mãe Fujitsu D2779. Fujitsu D2779 32 páginas. System board d2779 for primergy tx100 s2

Main memory

3.2

Main memory

The system board supports up to 16 GB of main memory. 4 slots (2 memory

banks with 2 slots each) are provided for the main memory. Every slot can be

fitted with DDR3 UDIMMs with ECC with 1 GB, 2 GB or 4 GB.

The system board supports x72 ECC DDR3 UDIMMs with 1 Gbit and 2 Gbit.

RDIMMS are not supported.

ECC with memory scrubbing is supported. There is no support for non-ECC-

DIMMs.

Installing and removing memory boards and DIMMs is described in the

Options Guide.

The system board has four slots for memory modules. For dual-channel

operation the memory modules must be equipped in pairs and color coded,

starting from the bottom to the top.

Black slots: DIMM 1A (1) and DIMM 1B (2)

Blue slots: DIMM 2A (3) and DIMM 2B (4)

Figure 2: DIMM slot assignment

– Each memory bank is equipped with two memory modules with the same

capacity.

– The module capacity between pairs can differ: pair 1A/1B can be populated

with two 1 GB modules and pair 2A/2B with two 2 GB modules.

Technical Manual

Features

D2779 (TX100 S2)