Indesit VIX644CE Información de servicio - Página 29
Navegue en línea o descargue pdf Información de servicio para Placa Indesit VIX644CE. Indesit VIX644CE 33 páginas. Touch control induction hob
Imprimir página
FAULT CODES
Hob Status
Fault Description
Codes
User interface
F / c
overtemperature
User interface
F / E
temperature sensor
(NTC) error
F / H
EEPROM error
F / J
Safety key error
Light condition error
F / L
(keyboard error)
User interface
F / t
temperature sensor
(NTC) error
F / U
Safety key error
Step 2 If fault persists, service visit required.
Step 3 Change user interface.
Step 1 Advice the user not to put hot pans on control area. Wait until the system cools down.
Step 1 Ask the user to switch the power off and on (try to reset the system).
Step 2 If fault persists, service visit required.
Step 3 Change user interface.
Step 1 Ask the user to switch the power off and on (try to reset the system).
Step 2 If fault persists, service visit required.
Step 3 Change user interface.
Step 1 Ask the user to switch the power off and on (try to reset the system).
Step 2 If fault persists, service visit required.
Step 3 Change user interface.
Advise the user to switch off any lighting.
Step 1
Then switch the power off and on.
(Lights can affect the user interface initial calibration process).
Step 1 Ask the user to switch the power off and on (try to reset the system).
Step 2 If fault persists, service visit required.
Step 3 Change user interface
.
Step 1 Ask the user to switch the power off and on (try to reset the system).
Step 2
If fault persists, service visit required.
Step 3
Change user interface
Service Steps