Indesit VIX644CE Service Information - Page 29
Browse online or download pdf Service Information for Hob Indesit VIX644CE. Indesit VIX644CE 33 pages. Touch control induction hob
Print Page
FAULT CODES
Hob Status
Fault Description
Codes
User interface
F / c
overtemperature
User interface
F / E
temperature sensor
(NTC) error
F / H
EEPROM error
F / J
Safety key error
Light condition error
F / L
(keyboard error)
User interface
F / t
temperature sensor
(NTC) error
F / U
Safety key error
Step 2 If fault persists, service visit required.
Step 3 Change user interface.
Step 1 Advice the user not to put hot pans on control area. Wait until the system cools down.
Step 1 Ask the user to switch the power off and on (try to reset the system).
Step 2 If fault persists, service visit required.
Step 3 Change user interface.
Step 1 Ask the user to switch the power off and on (try to reset the system).
Step 2 If fault persists, service visit required.
Step 3 Change user interface.
Step 1 Ask the user to switch the power off and on (try to reset the system).
Step 2 If fault persists, service visit required.
Step 3 Change user interface.
Advise the user to switch off any lighting.
Step 1
Then switch the power off and on.
(Lights can affect the user interface initial calibration process).
Step 1 Ask the user to switch the power off and on (try to reset the system).
Step 2 If fault persists, service visit required.
Step 3 Change user interface
.
Step 1 Ask the user to switch the power off and on (try to reset the system).
Step 2
If fault persists, service visit required.
Step 3
Change user interface
Service Steps