Indesit VIX644CE Service Information - Page 28

Browse online or download pdf Service Information for Hob Indesit VIX644CE. Indesit VIX644CE 33 pages. Touch control induction hob

Print Page

FAULT CODES

Hob Status

Fault Description

Codes

F / 6

Mains zero crossing loss

Induction heater

F / 7

temperature sensor

(NTC) error

Induction heater

F / 8

temperature sensor

(NTC) error

F / 9

Heater overvoltage fault

F / A

Safety key error

F / C

Safety key error

Step 4 If harness OK, change user interface.

Step 5 If fault persists change Power board.

Step 1 Ask the user to confirm correct connection to power supply, ensuring link is in place.

Step 2 If external wiring and connection to appliance is correct service visit required.

Step 3 Replace Power board.

Step 4 If fault persists replace filter unit.

Step 1 Ask the user to switch the power off and on (try to reset the system).

Step 2 If fault persists, service visit required.

Step 3 Check heater temperature sensor (NTC) connections. If OK replace Power board.

Step 1 Ask the user to switch the power off and on (try to reset the system).

Step 2 If fault persists, service visit required.

Step 3 Check heater temperature sensor (NTC) connections. If OK replace Power board.

Step 1 Ask the user to switch the power off and on (try to reset the system).

Step 2 If fault persists, service visit required.

Step 3 Replace Power board.

Step 1 Ask the user to switch the power off and on (try to reset the system).

Step 2 If fault persists, service visit required.

Step 3 Change user interface.

Ask the user to switch off any halogen lights and clean the glass surface.

Step 1

Then switch the power off and on (try to reset the system).

Service Steps