AEG 7000 Series Manual del usuario - Página 41

Navegue en línea o descargue pdf Manual del usuario para Congelador AEG 7000 Series. AEG 7000 Series 49 páginas.
También para AEG 7000 Series: Manual del usuario (32 páginas), Manual del usuario (44 páginas), Manual del usuario (32 páginas), Manual del usuario (28 páginas), Manual del usuario (36 páginas)

If the appliance is installed in an area

where the temperature can reach values

around 0° C or drop below, remove the

remaining water from the inlet hose and

the drain pump.

1. Disconnect the mains plug from the

mains socket.

2. Close the water tap.

3. Put the two ends of the inlet hose in

a container and let the water flow out

of the hose.

14. TROUBLESHOOTING

WARNING!

Refer to Safety chapters.

The appliance does not start or it stops during operation. First try to find a solution to the

problem (refer to the tables).

WARNING!

Deactivate the appliance before carrying out any check.

With some problems, the display shows an alarm code and the Start/Pause button may

flash continuously:

If the appliance is overloaded, remove some items from the drum and/or

keep pressed the door while touching the Start/Pause button until the

indicator

Problem

stops flashing (see the picture below).

Possible solution

4. Empty the drain pump. Refer to the

emergency drain procedure.

5. When the drain pump is empty,

install the inlet hose again.

WARNING!

Make sure that the

temperature is higher than

0 °C before you use the

appliance again.

The manufacturer is not

responsible for damages

caused by low temperatures.

ENGLISH