A-Neuvideo ANI-16-4K60 Manual de instrucciones - Página 5

Navegue en línea o descargue pdf Manual de instrucciones para Matriz de conmutación A-Neuvideo ANI-16-4K60. A-Neuvideo ANI-16-4K60 16 páginas. 16x16 hdmi matrix switcher w/ smart edid management

Imprimir página
A
NEUVIDEO
FRONT PANEL
OLED DISPLAY:
Displays current input / output port.
q
IR WINDOW:
IR receiver window, receives IR remote control signal for this device only.
w
LEFT/RIGHT/UP/DOWN/OK BUTTONS:
e
display the input and output port of the last saved configuration.
LEFT BUTTON:
The INPUT port on the OLED screen will flicker when you press the left button. Use the 'UP' or 'DOWN' buttons to select
the previous or the next input source. Then press the 'OK' button to confirm.
RIGHT BUTTON:
The OUTPUT port on the OLED screen will flicker when you press the right button. Use the 'UP' or 'DOWN' buttons to
select the pervious or the next output display. Then press the 'OK' button to confirm.
UP AND DOWN BUTTON:
POWER BUTTON:
Pressing the button to power on the product and press 5 times to place in standby status.
r
NOTE:
TURN ON/OFF THE HDCP:
▪ TURN HDCP ON: Press and hold the front panel "OK" button for 10 seconds. The front panel LED screen "ON" and flicker. At this time,
you have turned ON the HDCP function and output HDCP will follow the input signal HDCP. The ANI-16-4K60 will reboot.
▪ TURN HDCP OFF: Press and hold the front panel "OK" button for 10 seconds. The front panel LED screen "OFF" and flicker. At this
time, you have turned OFF the HDCP function and output HDCP will no longer follow the input signal HDCP. The ANI-16-4K60 will reboot.
REAR PANEL
HDMI IN (1~16):
HDMI input port, connects to HDMI source devices with a HDMI cable.
q
HDMI OUT (1~16):
HDMI output port, connects to HDMI display devices such as TVs or Monitors with a HDMI cable.
w
LAN:
Connects to an active Ethernet link with a RJ-45 cable to control the unit.
e
RS-232:
Connects to a PC or control system with a phoenix connector cable to control the unit.
r
GND:
Connects the GND port to ground.
t
AC POWER INPUT:
Connects AC power with an AC power cable.
y
The product has power off remember function. After the power cycle, the OLED screen will
'UP' button is used to increase number and 'DOWN' button is used to decrease number.
FRONT & rear PANELS
3