A-Neuvideo ANI-16-4K60 Instruction Manual - Page 5

Browse online or download pdf Instruction Manual for Matrix Switcher A-Neuvideo ANI-16-4K60. A-Neuvideo ANI-16-4K60 16 pages. 16x16 hdmi matrix switcher w/ smart edid management

Print Page

1. Web Gui

NEUVIDEO

FRONT PANEL

OLED DISPLAY:

Displays current input / output port.

IR WINDOW:

IR receiver window, receives IR remote control signal for this device only.

LEFT/RIGHT/UP/DOWN/OK BUTTONS:

display the input and output port of the last saved configuration.

LEFT BUTTON:

The INPUT port on the OLED screen will flicker when you press the left button. Use the 'UP' or 'DOWN' buttons to select

the previous or the next input source. Then press the 'OK' button to confirm.

RIGHT BUTTON:

The OUTPUT port on the OLED screen will flicker when you press the right button. Use the 'UP' or 'DOWN' buttons to

select the pervious or the next output display. Then press the 'OK' button to confirm.

UP AND DOWN BUTTON:

POWER BUTTON:

Pressing the button to power on the product and press 5 times to place in standby status.

NOTE:

TURN ON/OFF THE HDCP:

▪ TURN HDCP ON: Press and hold the front panel "OK" button for 10 seconds. The front panel LED screen "ON" and flicker. At this time,

you have turned ON the HDCP function and output HDCP will follow the input signal HDCP. The ANI-16-4K60 will reboot.

▪ TURN HDCP OFF: Press and hold the front panel "OK" button for 10 seconds. The front panel LED screen "OFF" and flicker. At this

time, you have turned OFF the HDCP function and output HDCP will no longer follow the input signal HDCP. The ANI-16-4K60 will reboot.

REAR PANEL

HDMI IN (1~16):

HDMI input port, connects to HDMI source devices with a HDMI cable.

HDMI OUT (1~16):

HDMI output port, connects to HDMI display devices such as TVs or Monitors with a HDMI cable.

LAN:

Connects to an active Ethernet link with a RJ-45 cable to control the unit.

RS-232:

Connects to a PC or control system with a phoenix connector cable to control the unit.

GND:

Connects the GND port to ground.

AC POWER INPUT:

Connects AC power with an AC power cable.

The product has power off remember function. After the power cycle, the OLED screen will

'UP' button is used to increase number and 'DOWN' button is used to decrease number.

FRONT & rear PANELS