A-Neuvideo EP-132 Manual de instrucciones - Página 12

Navegue en línea o descargue pdf Manual de instrucciones para Media Converter A-Neuvideo EP-132. A-Neuvideo EP-132 20 páginas. Serial to ethernet converter

Imprimir página

NEUVIDEO

Controller Setup

Field Description

• IP Address: The IP address of EP-132 TCP/IP converter by separated (4) digits, don't let conflict with other devices on network. If

DHCP client mode enabled and there is DHCP server on the network, this field will be assigned by DHCP server automatically.

• Subnet mask: Subnet mask of network EP-132 TCP/IP converter connected to "255.255.255.0" usually used for the small network,

"255.255.0.0" for larger network by separated 4 digits.'

If your IP address provide by ISP or internal network administrator, please inquire information and type correctly. If DHCP client mode

enabled and there is DHCP server on the network, this field will be assigned by DHCP server automatically.

• gateway address: Gateway or Router IP address. 'Gateway' is device which connects local network to external network. If you need

communicate with other networks or your device owns real IP address on internet, please inquire information and type correctly. If there

is no gateway on network, just leave as "0.0.0.0".

If DHCP client mode enabled and there is DHCP server on the network, this field will be assigned by DHCP server automatically.

• Network link speed: The Physical Ethernet of speed link. "Auto" means the speed automatically selected by the converter. You can

also specify "10Mbps" or "100Mbps" to match speed of HUB.

• DhCP client: DHCP client mode could be enabled/disabled statues. If DHCP enabled, there should be DHCP server on the network.

If DHCP disabled [IP address], [Subnet mask] and [Gateway address] should be manually assigned.

• Socket port of hTTP setup: The socket port used conduct to setup browser. Normally, HTTP protocol use TCP port "80" for

communication. If the field changed to "81", the port "80" will be reserved for user own Web.

To enter setup browser page, "http://x.x.x.x:81" should be typed for socket port "81" and "http://x.x.x.x" for socket port "80", where

"x.x.x.x" the converter IP address.

• Destination IP address: The server IP address and socket port would be connected in TCP Client and UDP mode for a certain server

IP address.

• Destination socket port: The server socket port would be connected in TCP Client and UDP mode for certain socket port.

• Connection: The connection can be selected in 2 modes.

"Auto function for connect Automatic of converter"

"Manual function for program control of converter"

(Figure 3.7)

Web Console Configuration

The Setup Page

Type the correct password in "Password" field and click the

[Login] button in "Controller Status" page, then "Controller Setup"

page will appear (see the Figure 3.7).

Note: If you forget the password or can't login successfully,

please contact the manufacturer directly.