A-Neuvideo EP-132 Manual de instrucciones - Página 11

Navegue en línea o descargue pdf Manual de instrucciones para Media Converter A-Neuvideo EP-132. A-Neuvideo EP-132 20 páginas. Serial to ethernet converter

Imprimir página

NEUVIDEO

Web Console Configuration

In addition of basic IP address and subnet mask, specific device settings can be set through HTTP protocol with popular browsers, e.g.

Internet Explorer, Netscape, etc. Setup converter as easy as surfing on WWW, no special software will be required. Press [Alt] + [Enter]

or select [Device Settings] in the [Config] menu will open a new window in browser to login the device. Alternatively, if IP address

of converter already known, you can connect to converter directly by providing IP address in URL field of browser.

Controller Status

Field Description

• System time elapsed: The time elapsed since start in this device [Day Hour: Minute: Second] format. This information can be useful

identifying reliability of system.

• Firmware version: Converter firmware identified by date code. This information will be required looking for technical support.

• Serial number: Converter consisted "Type Number (5 digits) and unique MAC (Media Access Control) address used by Ethernet in

hex format, 8 digits.

• Password (Setup login): This field is administration password for authentication. Factory is default "empty". However, it is not

recommended to leave empty in field operation. If you could not login, it means you have to key the password. If you do not know the

password you can turn off the power and then use any point tip to press "Reset" button and hold it to turn on the power. The password

will be reset to the factory default as "empty".

EP-132 TCP/IP converter uses the same password protection mechanism commonly used Windows NT or UNIx. If there are more than

"3 consecutive failures" in password check during login, the login function will be disabled for "15 minutes". During this 15 minutes period,

if you supply a correct password, login will not proceed. This prevents intruder from finding the password by computer generated program.

(Figure 3.6)

Web Console Configuration

The Login Page

For Setup of EP132 TCP/IP converter as easy as surfing on

WWW, no special software will be required. Popular Browsers

such as IE or Netscape can easily do the setup process. In the

browser URL field, set IP address of device directly, to enter

"Controller Status" page, please follow the steps below.

• Open your browser. This chapter will use IE as example.

• In browser URL field, type IP address of converter directly

and press ENTER. (The IP address what you set using

Device Management Utility.)

• The "Controller Status" page will be shown (see Figure 3.6).