Kohler K-1109 Manual de instalación - Página 7

Navegue en línea o descargue pdf Manual de instalación para Bañeras Kohler K-1109. Kohler K-1109 32 páginas. Bath whirlpool
También para Kohler K-1109: Manual del propietario (36 páginas), Manual de instalación (36 páginas)

Imprimir página

Drainage

4. Cut the Pump Banding Straps

IMPORTANT! This step is necessary to make your Kohler whirlpool operate more quietly.

- Use tin snips to cut the two pump banding straps from the whirlpool pump.

- To minimize whirlpool noise and vibration, be sure the pump is not in direct contact with the whirlpool harness

after the pump banding straps are cut.

5. Install the Plumbing

CAUTION: Risk of property damage. Ensure a watertight seal on the whirlpool drain.

- Connect the drain to the trap according to the drain manufacturer's instructions.

NOTICE: An access panel will simplify future maintenance.

- Install the faucet valving according to the faucet manufacturer's instructions. Do not install the faucet trim until

instructed. Open the hot and cold water supplies, and check the supply connections for leakage.

- Run water into the whirlpool, and check the drain connections for leakage.

Kohler Co.

Pump

Suction Line

Leave the pump support board

attached to the whirlpool.

Cut the pump

banding straps

Pump Support Bracket

1010997-2-