AQC MAXIPLY DMP-170S Manual del usuario - Página 18
Navegue en línea o descargue pdf Manual del usuario para Colector de polvo AQC MAXIPLY DMP-170S. AQC MAXIPLY DMP-170S 20 páginas. Open type dust collector
Imprimir páginaMultiple pocket type dust collector
Problem
Air leaks in the system
Air volume is less
than original design
Ducting and / or filter
envelope obstructed
Temperature is higher
than normal in
collector
Dust filtered is not
compatible with filter
envelope
Presence of humidity
in filtered air
Rapid deterioration
of filter envelope
Clog in hopper section
Incorrect installation
of filter envelope
Abrasion of filter
envelope due to
high inlet velocity
Probable cause
Check for leaks in the ducting and connections.
Seal leaks.
Check filter envelope for clogs, debris, etc. Check for
clogs in ducting system and gates. Repair, clean or
modify if necessary.
Check filtered air temperature. Bring necessary
corrections to obtain proper temperatures.
Check for dust properties to be filtered. A.Q.C. Inc
representative or consultant will guide you for
compatible filter. Replace if necessary.
Reduce or modify humidity factor.
Replace filter envelope.
Find the clog and clean hopper.
Examine the filter envelope and locate damages caused
by a faulty installation. Repair or replace filter envelope
if necessary.
Examine the filter envelope for holes or punctures.
If needed, install a diffuser at air inlet.
Solution
18