AQC MAXIPLY DMP-170S 소유자 매뉴얼 - 페이지 18

{카테고리_이름} AQC MAXIPLY DMP-170S에 대한 소유자 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. AQC MAXIPLY DMP-170S 20 페이지. Open type dust collector

Multiple pocket type dust collector

Problem

Air leaks in the system

Air volume is less

than original design

Ducting and / or filter

envelope obstructed

Temperature is higher

than normal in

collector

Dust filtered is not

compatible with filter

envelope

Presence of humidity

in filtered air

Rapid deterioration

of filter envelope

Clog in hopper section

Incorrect installation

of filter envelope

Abrasion of filter

envelope due to

high inlet velocity

Probable cause

Check for leaks in the ducting and connections.

Seal leaks.

Check filter envelope for clogs, debris, etc. Check for

clogs in ducting system and gates. Repair, clean or

modify if necessary.

Check filtered air temperature. Bring necessary

corrections to obtain proper temperatures.

Check for dust properties to be filtered. A.Q.C. Inc

representative or consultant will guide you for

compatible filter. Replace if necessary.

Reduce or modify humidity factor.

Replace filter envelope.

Find the clog and clean hopper.

Examine the filter envelope and locate damages caused

by a faulty installation. Repair or replace filter envelope

if necessary.

Examine the filter envelope for holes or punctures.

If needed, install a diffuser at air inlet.

Solution