Aqua HC 100 Manual de instrucciones de funcionamiento y mantenimiento - Página 6
Navegue en línea o descargue pdf Manual de instrucciones de funcionamiento y mantenimiento para Bomba de agua Aqua HC 100. Aqua HC 100 20 páginas.
También para Aqua HC 100: Manual de instrucciones de funcionamiento y mantenimiento (19 páginas)
Imprimir página
- 1. Table of Contents
- 1. 1 General Comments
- 2. 2 Technical Characteristics
- 2. Hydraulic Connection
- 2. Programming
- 2. MAINTENANCE 3.1 General Maintenance Comments
- 3. 3 0 Maintenance
- 3. Replacing Worn Parts
- 3. Commonly Reported Problems
- 3. Chemical Compatibility Table
- 3. Warranty Certificate
- 3. Connections
Programming instruction for
Dosing Pump
HC100
MODEL HC 100
The HC 100 pump is a simple on/off dosing pump. The output volume is controlled by adjusting the
number of pulses per minute which is done by using the controls on the front panel. You can adjust the
pump between 0 -100% (0-105 imp/min) of its maximum output by the potentiometer on the front panel.
There is an ON/OFF switch that allows you to turn the pump on and off & also 2 LEDS, one green. (pump
on) and one intermittent RED (emits every time the pump pulses).
The HC 100 series allows you to regulate the flow in a more precise way, The output volume is controlled
by adjusting the number of pulses per minute which is done using the controls on the front panel, You can
adjust the pump between 0 - 100% or 0- 20% of it's maximum output. The operator in this way can choose
a much lower number of pulses per minute.
PROGRAMMING
The pump can be turned on with an on/off switch on the front panel. The pumps output can be adjusted
between 0 - 100% or 0-20% of it's maximum output via the selector switch, Adjustment in each range is
controlled by the potentiometer on the front panel. Each time the pump doses a LED flashes.
5
HC100/N/240717/NW