Aqua HC 100 운영 및 유지보수 지침 매뉴얼 - 페이지 6

{카테고리_이름} Aqua HC 100에 대한 운영 및 유지보수 지침 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Aqua HC 100 20 페이지.
Aqua HC 100에 대해서도 마찬가지입니다: 운영 및 유지보수 지침 매뉴얼 (19 페이지)

Programming instruction for

Dosing Pump

HC100

MODEL HC 100

The HC 100 pump is a simple on/off dosing pump. The output volume is controlled by adjusting the

number of pulses per minute which is done by using the controls on the front panel. You can adjust the

pump between 0 -100% (0-105 imp/min) of its maximum output by the potentiometer on the front panel.

There is an ON/OFF switch that allows you to turn the pump on and off & also 2 LEDS, one green. (pump

on) and one intermittent RED (emits every time the pump pulses).

The HC 100 series allows you to regulate the flow in a more precise way, The output volume is controlled

by adjusting the number of pulses per minute which is done using the controls on the front panel, You can

adjust the pump between 0 - 100% or 0- 20% of it's maximum output. The operator in this way can choose

a much lower number of pulses per minute.

PROGRAMMING

The pump can be turned on with an on/off switch on the front panel. The pumps output can be adjusted

between 0 - 100% or 0-20% of it's maximum output via the selector switch, Adjustment in each range is

controlled by the potentiometer on the front panel. Each time the pump doses a LED flashes.

HC100/N/240717/NW