Aqua Creek Ambassador F-PPXRD-NA-02 Manual del usuario - Página 9

Navegue en línea o descargue pdf Manual del usuario para Sistemas de elevación Aqua Creek Ambassador F-PPXRD-NA-02. Aqua Creek Ambassador F-PPXRD-NA-02 18 páginas. Pool lift

Imprimir página

Pull-out Legrest Installation Instructions

The PULL-OUT LEGREST ASSEMBLY is designed to fit under the standard Aqua Creek chair, and

is installed inside the 2" square tubing that supports the chair from underneath. Installation is

the same for every lift, Ranger lift is shown in picture below. To install the pull-out leg-rest;

1. With a flat-blade screwdriver, pry off the 2" square plug from the end of the 2" square tube

of the seat arm.

SEE FIGURE 9.

2. Drill a 9/32" hole at the location indicated in

support tube. Drill only through the bottom of the tube. Remove the burrs from the hole before

installing the legrest assembly.

2" SQUARE

PLUG

DRILL

9/32" HOLE

(BOTTOM OF CHAIR SUPPORT TUBE)

(SEE DRAWING TO THE RIGHT)

through the bottom of the chair

FIGURE 10

SEAT

SEAT ARM

FIGURE 9

DRILL

9/32"

(THIS SIDE)

CHAIR SUPPORT TUBE

(BOTTOM VIEW)

FIGURE 10

3/4"

Revised 6/28/18