AVLT-Power Non-VESA Monitor Adapter Kit for 13" to 27" LCD/LED Screen Sizes Manual de instrucciones de instalación - Página 5

Navegue en línea o descargue pdf Manual de instrucciones de instalación para Bastidores y soportes AVLT-Power Non-VESA Monitor Adapter Kit for 13" to 27" LCD/LED Screen Sizes. AVLT-Power Non-VESA Monitor Adapter Kit for 13" to 27" LCD/LED Screen Sizes 8 páginas.

Imprimir página
2D) H-pattern: Suitable for flat backplate surfaces. Use one set of bolt/washer/nut to attach
the arms to the VESA plate.
1. Use Bolt (E), Washer (I) with Nut (D) and tighten using Wrench (J), see Figure 5. Note:
Do not fully tighten until instructed to do so in Step 3.
E
Step 3) Install the Monitor
1. Adjust the position of the Support Arms to match your monitor, then fully tighten
Nut (D) using Wrench (J) to secure them to the VESA plate, see Figure 2, 3, 4 or 5.
2. Tighten Bolt (F/G/H) finger tight using a Phillips screwdriver to secure Support (B)
to the monitor, see Figure 6.
3. Install Plastic Cap (C) onto Support (B), see Figure 6.
Bolt (F/G/H)

Maintenance

Check the mounting screws every month for tightness.
J
D
I
Figure 5
B
C
Figure 6
5