AVLT-Power Non-VESA Monitor Adapter Kit for 13" to 27" LCD/LED Screen Sizes 설치 지침 매뉴얼 - 페이지 5

{카테고리_이름} AVLT-Power Non-VESA Monitor Adapter Kit for 13" to 27" LCD/LED Screen Sizes에 대한 설치 지침 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. AVLT-Power Non-VESA Monitor Adapter Kit for 13" to 27" LCD/LED Screen Sizes 8 페이지.

페이지 인쇄

2D) H-pattern: Suitable for flat backplate surfaces. Use one set of bolt/washer/nut to attach

the arms to the VESA plate.

1. Use Bolt (E), Washer (I) with Nut (D) and tighten using Wrench (J), see Figure 5. Note:

Do not fully tighten until instructed to do so in Step 3.

Step 3) Install the Monitor

1. Adjust the position of the Support Arms to match your monitor, then fully tighten

Nut (D) using Wrench (J) to secure them to the VESA plate, see Figure 2, 3, 4 or 5.

2. Tighten Bolt (F/G/H) finger tight using a Phillips screwdriver to secure Support (B)

to the monitor, see Figure 6.

3. Install Plastic Cap (C) onto Support (B), see Figure 6.

Bolt (F/G/H)

Maintenance

Check the mounting screws every month for tightness.

Figure 5

Figure 6