Aqua Creek Products PROWAVE POOL BIKE F-PWRWV-02 Manual - Página 4
Navegue en línea o descargue pdf Manual para Gimnasios Aqua Creek Products PROWAVE POOL BIKE F-PWRWV-02. Aqua Creek Products PROWAVE POOL BIKE F-PWRWV-02 12 páginas.
Imprimir página3.
Attach the pedals to the bike using the supplied 5/16" hex bolts, lock washers and at washers.
See FIG. 3 below.
NOTES: Viewing from as if sitting on the bike, be sure the right pedal is being installed on the right
side of the bike and left pedal on the left side of the bike! Installing them backwards could lead to
the pedals unthreading and breaking o !
Be sure the pedals are opposite each other! If the left pedal is all the way up, the right pedal should
be all the way down!
The ProWave Bike is now fully assembled! Please note that it is easiest to set seat height, handlebar
location and foot strap tightness BEFORE placing the bike in the water. See chart below to properly
adjust the seat height to best suit the user. Before riding, always check that the seat post is securely
clamped. Riding with an improperly tightened seat post can allow the seat to slip and/or fall.
Height
5'0" - 5'3"
5'2" - 5'5"
5'4" - 5'7"
5'6" - 5'9"
5'8" - 5'11"
5'10" - 6'1"
6'0" - 6'3"
4
Copyright © 2019 Aqua Creek Products All Rights Reserved
ProWave Assembly Instructions
RIGHT PEDAL
ASSEMBLY
Inseam Length
26.5" - 28"
27.5" - 29"
28.5" - 30"
29.5" - 31"
30.5" - 32"
31.5" - 33"
32.5" - 34"
TOOLS REQUIRED:
1/2" SOCKET
FIGURE 3
Frame Size
19" - 19.63"
19.68" - 20.5"
20.5" - 21.25"
21.25" - 22"
22" - 22.83"
22.83" - 23.63"
23.63" - 24.5"
LEFT PEDAL
ASSEMBLY
5/16" FLAT
WASHER
5/16" LOCK
WASHER
5/16" X 3/4"
HEX BOLT
FRAME
SIZE
Revised 10/30/19