Aqua Creek Products PROWAVE POOL BIKE F-PWRWV-02 매뉴얼 - 페이지 4

{카테고리_이름} Aqua Creek Products PROWAVE POOL BIKE F-PWRWV-02에 대한 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Aqua Creek Products PROWAVE POOL BIKE F-PWRWV-02 12 페이지.

페이지 인쇄

Attach the pedals to the bike using the supplied 5/16" hex bolts, lock washers and at washers.

See FIG. 3 below.

NOTES: Viewing from as if sitting on the bike, be sure the right pedal is being installed on the right

side of the bike and left pedal on the left side of the bike! Installing them backwards could lead to

the pedals unthreading and breaking o !

Be sure the pedals are opposite each other! If the left pedal is all the way up, the right pedal should

be all the way down!

The ProWave Bike is now fully assembled! Please note that it is easiest to set seat height, handlebar

location and foot strap tightness BEFORE placing the bike in the water. See chart below to properly

adjust the seat height to best suit the user. Before riding, always check that the seat post is securely

clamped. Riding with an improperly tightened seat post can allow the seat to slip and/or fall.

Height

5'0" - 5'3"

5'2" - 5'5"

5'4" - 5'7"

5'6" - 5'9"

5'8" - 5'11"

5'10" - 6'1"

6'0" - 6'3"

ProWave Assembly Instructions

RIGHT PEDAL

ASSEMBLY

Inseam Length

26.5" - 28"

27.5" - 29"

28.5" - 30"

29.5" - 31"

30.5" - 32"

31.5" - 33"

32.5" - 34"

TOOLS REQUIRED:

1/2" SOCKET

FIGURE 3

Frame Size

19" - 19.63"

19.68" - 20.5"

20.5" - 21.25"

21.25" - 22"

22" - 22.83"

22.83" - 23.63"

23.63" - 24.5"

LEFT PEDAL

ASSEMBLY

5/16" FLAT

WASHER

5/16" LOCK

WASHER

5/16" X 3/4"

HEX BOLT

FRAME

SIZE

Revised 10/30/19