Aqua Medic SP 3000 Manual de instrucciones - Página 2

Navegue en línea o descargue pdf Manual de instrucciones para Acuarios Aqua Medic SP 3000. Aqua Medic SP 3000 6 páginas. Dosing pump

Features

The SP 3000 is a peristaltic pump in which liquid is transported by repeatedly kneading the

pump hose. It can be used wherever small amounts of liquid have to be pumped.

In the aquarium, the pump can be used for two purposes:

as feed pump for low flow reactors, like Nitratereductors, Calciumreactors or

Phosphate Filters.

as a dosing pump for fertilisers in fresh water aquariums and for trace elements, calcium

and bicarbonates in salt water aquariums.

The dosing pump is supplied with a long lasting synchronous motor and the pump hose is

made of Santoprene®, a specially developed material resistant to many chemicals and with a

very long life – typically in excess of 3 million compressions.

IMPORTANT NOTE:

- The pump must be operated on the correct voltage (see type label)

2. Technical Data

Model

Power supply

Power consumption

Maximum flow

Connections

Motor

Speed

Motor life

Pump hose life

Continuous running possible

3. Connections

The pump is typically connected with aquarium air hose (6/4 mm), ¼". However it should be

ascertained that the hose is suitable for the chemical charachteristics of the liquid being

pumped.

4. Control

The synchronous motor of the pump operates at a fixed speed of 20 rpm. This cannot be

changed. If smaller amounts of water are to be dosed or a smaller flow rate is required, the SP

3000 can be switched on and off for varying periods of times. For exact dosing a digital timer

switch, programmable in minutes, should be used.

Dosing pump SP 3000

230 v / 50 Hz

4.5 watts

3 litres/hour - 50 ml/min – 0.8 gph

6/4 mm hose ( ¼")

synchronous

20 rpm

>10,000hrs

>3 Million turns

Yes