Avol AIS500 Manual de instrucciones - Página 7

Navegue en línea o descargue pdf Manual de instrucciones para Estación de acoplamiento Avol AIS500. Avol AIS500 12 páginas.

Imprimir página

1. Set Time

Install Batteries

Note:

•

You can only use AC power as power supply.

Batteries ( not supplied ) are for backup

purpose.

•

If the system is unplugged or if a power

failure occurs, all setups of the unit will be

erased unless there are batteries in the unit

and don't change them at this time. Once

setups had be erased, please resetup all items

( tuner stations; Source... ) which you desire.

1 Open the batteries compartment.

2 Install two AAA batteries(not supplied) with

correct polarity and the install steps as

indicated.

3 Close the battery compartment.

Connect Power

Caution:

Risk of product damage! Ensure that the

power supply voltage corresponds to the

voltage printed on the back or the underside

of the unit.

Before connecting the AC power cord, ensure

you have completed all other connections.

Connect the AC power cord to the wall socket.

General Operation

Power

You can use all the functions on the top of the

unit or the remote control after connecting to

power supply (called Standby Mode).

Turn On

Press ON/OFF button to turn the system on from

standby mode.

Press ON/OFF/SOURCE to select diff erent

functions.

When turning the system on, the system will

continue in the mode it was in when it was

turned off last time.

Turn Off

Press and hold ON/OFF button on the unit or

press the button on the remote control again to

turn the system off and go to standby mode.

Be sure to unplug the power cord from the

outlet when the system is not in use for an

extended period of time.

Set Time

The built-in clock shows the correct time in the

display.

1 In standby mode, press and hold the CLOCK

button for some seconds, hour indicator will

blink.

2 Set the hour with the

3 Press the CLOCK button to confi rm, minute

indicator will blink.

4 Repeat steps 2-3 to set the minutes, day,

month and year.

In standby mode, press and hold the CLOCK

button for some seconds, then press the

button to select 12/24 hour format.

button or

button.



