ページを印刷するInstall Batteries
Note:
•
You can only use AC power as power supply.
Batteries ( not supplied ) are for backup
purpose.
•
If the system is unplugged or if a power
failure occurs, all setups of the unit will be
erased unless there are batteries in the unit
and don't change them at this time. Once
setups had be erased, please resetup all items
( tuner stations; Source... ) which you desire.
1 Open the batteries compartment.
2 Install two AAA batteries(not supplied) with
correct polarity and the install steps as
indicated.
3 Close the battery compartment.
Connect Power
Caution:
-
Risk of product damage! Ensure that the
power supply voltage corresponds to the
voltage printed on the back or the underside
of the unit.
-
Before connecting the AC power cord, ensure
you have completed all other connections.
Connect the AC power cord to the wall socket.
General Operation
Power
You can use all the functions on the top of the
unit or the remote control after connecting to
power supply (called Standby Mode).
Turn On
Press ON/OFF button to turn the system on from
standby mode.
Press ON/OFF/SOURCE to select diff erent
functions.
When turning the system on, the system will
continue in the mode it was in when it was
turned off last time.
Turn Off
Press and hold ON/OFF button on the unit or
press the button on the remote control again to
turn the system off and go to standby mode.
Be sure to unplug the power cord from the
outlet when the system is not in use for an
extended period of time.
Set Time
The built-in clock shows the correct time in the
display.
1 In standby mode, press and hold the CLOCK
button for some seconds, hour indicator will
blink.
2 Set the hour with the
3 Press the CLOCK button to confi rm, minute
indicator will blink.
4 Repeat steps 2-3 to set the minutes, day,
month and year.
In standby mode, press and hold the CLOCK
button for some seconds, then press the
button to select 12/24 hour format.
6
button or
button.
BF